REPLACEMENT/CHANGE PARTS FOR PREFORM MOULDS

Key Elements. AISI 420 / W.nY.1 .2083
Stavax from Assab / M310 from Bohler / AG2083 from Buderus / PK335 from Metatravne)

Post vacuum Hardened to 50-52HRC
Special Surface Treatments for wear & high temperature oxidation resistance like PVD or Plasma Assisted Chemical Vapour Deposition - TIN (Golden Yellow), CrN (Silver Grey), TiCrN (Dark Grey)
Balzers / Ion Bond have shops locally

Plates - W.nr.1 .2312 ( Holdax from Assab / Ramax 2 from Assab)

W.nr.1. .2316 (M300 from Bohler / AG 2316 from Buderus)

The life of the mould depends upon the extent of usage. However, we offer a 12-month guarantee for Blow Moulds / ISBM Moulds / Parts from the date of supply. Blow moulds are capable of running non- stop for anything between 3 to 5 years, if handled with care. Periodic maintenance of the blow moulds is required to ensure shining, effective cooling and ventilation.

We invite you to benefit from our cost effective MOULDS (priced at a fraction of European/ American / Japanese Prices) due to the advantages of economical labour cost, effectiveness of our production system and strictly-controlled overhead costs.